The Rev It Compass H2O Motorcycle Boots are part of the
latest REV'IT! collection.
The Compass H2O boots have the same look as the Gravel OutDry boots -
both are styled as true adventure boots. The difference between the two
is waterproofing: the Compass H2O boot is constructed with a Hydratex Z-
liner to keep the feet dry, and a REV'IT! by Vibram sole is suitable for
any condition and any riding position. The durable Compass H2O boot
meets all the safety requirements of the EN 13634:2015 standard and is
equipped with innovative features that will make these boots the most
wanted touring boots of the year.
Key Features / Points:
-
Full Grain Cowhide & Suede Leather Upper
-
Waterproof & Breathable Hydratex Membrane
-
Thermoformed Toecap, Heel Cup & Shin Guard
-
Injected Ankle Cup
-
Vibram Four Layer Sole Construction
View all Rev
It Motorcycle Boots. View all Touring
Motorcycle Boots.
The Rev It Compass H2O Waterproof Motorbike Boots are
packed with features...
PROTECTION FEATURES
Outer Shell
-
Omega Leather - This high-quality, full grain cowhide is
extremely durable and breathable, providing a combination of comfort
and protection on any length ride. Full grain leather is noted for its
excellent breathability and durability
-
Suede Leather - Suede is a type of leather with a napped
finish. Due to its texture and open pores, suede can absorb liquids
quickly. We use suede as a visor wiper on our gloves, putting its
absorbency to good use for keeping your field of vision clear
-
PWR|Shell 500D - This material is REV'IT!'s take on Cordura.
Consisting of 100% high-performance Polyamide yarns, PWR|shell takes
the best properties of Cordura - high melting point, tremendous tear-
and abrasion-resistance, and excellent durability - and puts the
unique REV'IT! design stamp on it. PWR|shell provides high-performance
protection for every rider
Waterproofing and Breathability
-
Hydratex|Z-Liner - A waterproof layer is laminated onto a
carrier to construct the REV'IT! Hydratex|Z-liner membrane. The
carrier, in turn, protects the membrane against wear-and-tear damage,
and the seams of the membrane are taped to ensure waterproofing. The
Z-liner is constructed between the lining and the outer shell. The
REV'IT! Hydratex|Z-liner membrane is used in garments that demand a
high level of all-weather protection
Protection
-
Thermoformed Heel Cup - The heel of the boot is reinforced for
safety. The rider won't notice it while wearing as the hard plastic
has been heated to mold it into the perfect shape. The reinforced heel
cup also contributes to a better posture of the foot
-
Thermoformed Toe Cap - The toe area of the boot has been
reinforced with a thermoformed hard plastic toe cap. Thermoformed
means the plastic has been heated to model the perfect shape. The
rider won't feel this critical feature when wearing the boot, but will
benefits from the added safety
-
Injected Ankle Cup
-
Thermoformed Shin Guard - The shin guard of the boot is
reinforced for added safety. The hard plastic has been heated and
moulded into the perfect shape so that it remains undetectable to the
rider
Visibility
-
Reflection at Heel and Sides - Better passive protection
through improved visibility
Composition
-
Outer Shell - 90% leather, 10% polyester
-
Outsole - 100% synthetic rubber
-
Midsole - 100% EVA foam
-
Lining - 100% polyester mesh
-
Membrane - 100% polyurethane (tricot 100% polyamide)
ERGONOMIC FEATURES
Features
-
Vibram Elevation Sole - REV'IT!'s in-house developed Vibram
Elevation sole features a fully-rubber construction. The Vibram Mont
compound of the sole is specifically chosen for durability, strength,
protection and for its continuous performance in both hot and cold
temperatures. The large contact patches found at the heel and toe
enhance grip and stability, while the open-lug, asymmetrical pattern
helps with balance on the bike yet follows the natural flow of your
step for maximum comfort off the bike. The Vibram Elevation sole is
created for the touring rider that might also find themselves in a
light off-road situation and is compliant with CE (EN13634) testing
standards
-
Rubber Abrasion Edge - The rubber abrasion edge minimizes
damage from everyday use. Be it flying stones and dirt while riding or
repeated wear from foot flexion - while crouching next to bike to
check the oil, for example - the rubber edge safeguards the boot from
damage
-
Reinforced Heel
-
Reinforced Toe
-
TPU Gear Shift Pad - An additional panel has been placed on the
foot top to protect the boot from the gear shifter. This extra layer
has a rippled texture for a sure grip while shifting
-
Anatomically Shaped Foot Bed - The anatomically shaped foot bed
has been incorporated to support the foot for both comfort and safety
-
PP Insole with Integrated Shank - To avoid torsion, the sole
features a layer of polypropylene, while a reinforced polypropylene
rib from the heel to the shank adds extra support for standing on the
foot pegs. To ensure walking remains comfortable, the front end of the
sole is equipped with grooves for flexibility
-
Anatomically Shaped Ankle Cup - The ankle area has been padded
and reinforced for comfort, and to support proper foot position
-
ECLAIR PRYM Reinforced Zipper - The heavy duty zipper's
extraordinary pulling strength can withstand repeated abuse. The teeth
of this zipper are twice as large and twice as strong as a regular
zipper's teeth. Additional webbing and yarn make this zipper extra
durable
-
Gusseted Zipper with Protection Edge - A leather gusset behind
the zipper has been installed for rain, wind and dirt proofing. A
protective edge is stitched right behind the zipper to avoid the
zipper from grabbing the gusset
-
3D Mesh Lining - This open-loft three-dimensional mesh enhances
the breathability of the boot
-
Easy Entrance Pull Strap - A heavy-duty pull strap at the calf
for ease of entry is made of a webbing that can handle the strongest
of tugs
-
Elastic Insert at Ankle - A cleverly positioned stretch panel
allows for natural movement for the ankle
Adjustability
-
Adjustable Hook and Loop Closure - The stretch panel at the
calf is covered with a hook and loop pile fastener for an adjustable
fit
CERTIFICATION
-
Standard - EN 13634:2010 or newest update
Your package will include the following:
-
Rev It Compass H2O Motorcycle Boots
Boot Sizing Guide
Please use the conversion table below to determine the right size for you:
EU Size |
36 |
37 |
38 |
39 |
40 |
41 |
42 |
43 |
44 |
45 |
46 |
47 |
48 |
49 |
UK Size |
3.5 |
4 |
5 |
6 |
6.5 |
7.5 |
8 |
9 |
9.5 |
10.5 |
11.5 |
12.5 |
13 |
14 |
US Size |
4.5 |
5 |
6 |
6.5 |
7 |
8 |
9 |
10 |
10.5 |
11 |
12 |
13 |
14 |
15 |