The Rev It Replica Motorcycle Jacket is part of the
latest Rev'It! collection.
The Rev It Replica Motorcycle Jacket enables riders to have MotoGP
performance and looks while maintaining the practicality of a
multi-purpose jacket. Combined with the GT-R trousers it creates a full
leather suit, but the jeans loops also make it ideal for commuting.
Thanks to the detachable thermal body warmer the Replica jacket is also
suited for cooler circumstances. Monaco Performance Cowhide and
PWR|Shell 500D stretch provide a combination of high abrasion resistance
and comfort on the bike. The jacket is fitted with CE rated armour and
dual-comp protects on the shoulders and elbows.
Key Features / Points:
-
ProLifeŽ CE Armour
-
Dual-Comp Protectors
-
Monaco Performance Cowhide
-
Detachable Body Warmer
-
Race & Tight Fit
View all Rev'It!
Motorcycle Jackets. View all Motorcycle
Jackets.
The RevIt Replica Motorbike Jacket is packed with
features...
PROTECTION FEATURES
Outer Shell
-
Monaco Performance Cowhide - This top-grain leather not only
has had its surfaces sanded to correct imperfections, it has been
reinforced to up its performance factor for riding on the track or
street. Long-lasting and extremely protective
-
PWR|Shell 500D Stretch - This material is Rev'It!'s take on
CorduraŽ. Consisting of 100 percent high-performance polyamide yarns,
PWR|Shell takes the best properties of CorduraŽ high melting point,
tremendous tear- and abrasion-resistance, excellent durability ? and
puts the unique Rev'It! design stamp on it. This PWR|Shell fabric
comes in a stretch variant. 500D indicates the density of the fabric.
The higher the number the better the abrasion- and tear resistance
properties are
-
LoricaŽ - LoricaŽ is constructed from microfibres that
give the material characteristics similar to those of natural leather,
including a leather look. This low-maintenance material is not as
strong as leather, but softer and lighter, with a consistent thickness
that makes it easier to process
-
Neoprene - Neoprene is a synthetic rubber useful for protective
gear. It is abrasion-resistant, chemical-resistant, waterproof,
somewhat stretchable, and buoyant
Composition
-
Outer Shell - 88% leather, 11% polyamide, 1% elastane
-
Lining - 98% polyester, 1% polyamide, 1% elastane
-
Thermal Liner - 100% polyamide (insulation 100% polyester)
Insulation
-
Detachable Thermal Body Warmer
Protection
-
ProLifeŽ CE Protection at Shoulders and Elbows - Official
tests show that ProLifeŽ far surpasses the protection standards set by
the CE directive. The fabric used, elastomer, is the result of many
years of research and development. A technological process is used to
make the fabric microporous, with air in the microporous cells under
high pressure but unable to escape. This treatment makes the fabric
light, flexible, and exceptionally impact-resistant. Rev'It! has used
the pre-shaped ProLifeŽ 3D CE protector in Rev'It! motorcycle clothing
since it was first introduced
-
Dual-Comp Protectors at Shoulders and Elbows - TPU aluminium
protector at shoulders, elbows, and knuckles. The dual-comp protector
consists of a 3D, pre-shaped honeycomb structure of TPU material,
topped by an aluminium high-impact shield, for ultimate sliding. This
lightweight hard part increases the level of protection significantly,
without adding the considerable weight of traditional plastic hard
parts. When fighting G-forces, every gram counts! Under the shoulder
and elbow parts is ergonomically shaped, CE-approved armour, perfectly
placed to maximize impact-resistance while preserving freedom of
movement
-
Prepared for Seesoft CE-Level 2 Back Protector Insert ? Type RV
-
Safety Seams - The stitching in motorcycle garments contributes
greatly to the abrasion resistance of the total gear. This is why
Rev'It! uses safety seams on garment areas at increased risk of
impact. Safety seams have a visible as well as an invisible seam. This
construction keeps the material of the outer shell together, even when
the visible seam is thorn
-
Safety Stitching - Stitching seams can be the weakest link in
motorcycle garments, as they can rip upon impact. This ripping of
seams can be prevented, however, through safety-stitching technology.
Rev'It! uses safety stitching on garment areas at increased risk of
impact (directive on the definition of risk category in zones
13595-1:2002)
ERGONOMIC FEATURES
Fit
Adjustability
-
Adjustment Tab at Collar and Cuffs
-
Adjustment Straps at Waist
Ventilation
-
Partly Perforated Outer Shell at Front, Back and Arms
Features
-
Short and Long Connection Zipper - Thanks to the short and long
connection zipper, this jacket is compatible for pairing with any pair
of trousers in the Rev'It! line
-
Jeans Loop - The loop at the back of this jacket enables you to
attach it to your jeans, which prevents the jacket from creeping up:
no more exposed back when riding your bike
-
Comfort Cuffs
-
Stretch Lips at Back, Upper Arms, Elbows and Shoulders
-
Stretch Panels at Arms and Chest - The stretch panels in this
garment aid in flexibility. They contribute to the riders comfort as
they provide great freedom of movement
Pockets
-
Slit Pockets
-
Inner Pockets
-
Document Pocket
Your package will include the following:
-
Rev It Replica Motorcycle Jacket
Please Note: this product is sized by the UK chest size in inches. See the table below for other size conversions.
Rev'It! Men's Leather Jacket
Sizing Guide
Please use the conversion
table below to determine the right size for you:
UK/US Chest |
EU Men's Size |
Letter Size |
36" |
46 |
XXS |
38"
|
48 |
XS |
40" |
50 |
S |
42" |
52 |
M |
44" |
54 |
L |
46" |
56 |
XL |
48" |
58 |
XXL |
50" |
60 |
XXXL |
52" |
62 |
XXXXL |