Item Details - Sidi Crossfire Motocross Boots

Sidi Crossfire Motocross Boots

Sidi introduced the Sidi Crossfire Off Road Boots to the marketplace for 2006 but Stefan Everts and Antonio Cairoli had already worn them successfully when they won their 2005 Motocross World Championships. This Sidi Crossfire Motocross boots are the boots of champions and you should get yours whilst they are still available.

Manufactured in full grain leather, it has Lorica inserts on the front tongue and on the back joint for better flexibility and comfort. The boots tongue features a protective internal gusset, and the joints are both padded with closed-cell materials to avoid water and sweat absorption.The front part of the foot of the boot is entirely covered by plastic protection panels. The toeýs leather base is now partially covered with a plastic panel, while the tip of the sole is protected by a steel toe piece. A rigid replaceable nylon insert has been added to protect the inside of the boot in case the riderýs foot slides off the foot peg or if it slips off the kick-starter. The insert is replaceable by unscrewing the 4 screws.

The anatomically shaped heel is manufactured in TPU. Its particular form was studied for more security of the foot in case of twisting. Crossfire utilizes four micro adjustable buckles with indented memory-regulation straps. All the buckles, straps and retaining clips are easily replaceable. You will note that all four buckles work independently from each other. This system allows the boot to fit all shapes of feet and lower legs independently making each boot that much more comfortable for each individual rider. The retaining clips for the two lower straps (on the instep) have been moved internally for better closure. Moreover, a spoiler has been added to deflect stones and other dirt from the first buckle.

The key feature of the Sidi Crossfire boot is the Flex system. The Flex system, with its two circlips that attach the foot of the boot to the bootleg, improves leg flexation and allows for a more natural and correct position on the foot pegs. Circlips and hinges are replaceable. The second joint is on the bootleg itself, above the ankle joint. This technical improvement has been created for more flexibility; a more comfortable fit and increased adjustment of the boot leg. In this way, the rider can adjust the boot strap at the calf to his personal preference and achieve an improved fit.

Ghost Bikes now stock a full range of Sidi Boots Please click here to see what's currently available.

Sidi, continuously researching new technological solutions to enhance rider safety, is proud to present the Sidi Crossfire Moto-X Boot. With Sidi’s great style, feel, support and quality there are no finer performance off road boots in the world.

• Dual Flex System: Allows for easy movement forward and backward but is extremely strong side to side giving the rider the finest in ankle protection and long lasting comfort. The hinged, dual position, stitch-free upper is constructed from injection-molded plastic. With the exclusive Dual Flex system and the four floating, independent straps the Crossfire can provide each rider with a personal fit no matter his body shape or if he uses knee braces or not.
• Adjustable Calf System: Sidi’s exclusive, patented, adjustable calf system allows the rider to adjust the diameter of the Crossfire boot at the calf. This system, along with longer upper straps, allows the Crossfire boot to accommodate riders with larger calves easier than any other boot now available. The Crossfire can ccommodate riders with up to a 22-inch calf diameter 14 inches above from the bottom of their heel. The inner plastic plate is made of two different materials; a rigid one to support the boot and a heat resistant one to protect the rider’s leg from exhaust heat. All components of this system are fully replaceable and are available in a wide variety of colors.
• Heel Detail: Three extended ribs are featured at the back of the boot to assist the rider in making upshifts with his heel when starting a race. Rigid, shock resistant, anatomically shaped heel for maximum protection.
• Non-Bootie Designs: Sidi boots do not incorporate inner booties into their design, and for good reason. Booties make the design larger and cumbersome; add to the boot’s thickness, which interferes with shifting, plus the inner booties retain body heat affecting the rider’s performance and comfort.
• Buckles: Sidi’s exclusive cam-lock buckle system is acknowledged as the finest system on the planet. It must be as most of Sidi’s competitors have attempted to copy various aspects of it. The cam-lock buckle system incorporates a strap memory retention system. Adjust the straps once and they will be at the same position for every ride after that! No more readjusting for every ride or mid-day during a ride.
• Toe Areas: The tip of the toe on the Crossfire boots are covered with plastic to protect the base material and seems against abrasion from brush etc. Plastic shift and brake lever guards on the top of each foot area.
• Heat Shields: Each Sidi boot is equipped with an anti-heat undressed leather protection panel at the same height of most motorcycle’s exhaust heat shields.
• Composite Insole: Sidi is the only manufacture to use a composite insole that is anatomically shaped to the rider. A cushioned liner is provided that can be removed if the rider desires a more roomy fit. Sidi does not use steel shanks riveted to its insole like most manufactures, details such as this enable Sidi boots to enjoy a multi year service life versus the competitors multi month lifespan as over time, a steel shank can deteriorate, rust and fracture exposing the rider to injury.
• Lorica®: Every Crossfire SR outers is fully constructed with Lorica a composite micro fiber material created from strands less than one thousandth the thickness of silk. When injected with special resins, these fibers act like natural leather skin, but with the addition of better strength, softer texture, lighter weight and better moisture protection.
• Lining: Cambrelle is a lining that, due to its particular polyimide structure, guarantees a rapid drying rate after the boot gets wet or sweaty. This prevents the onset of mold forming which extends the boots lifespan dramatically. The Teflon treated mesh panels in the rear calf area of the boot allow humidity to escape while the boot is in use.

The Sidi Crossfire MX Boots are currently available in the colours shown in the product variation above, if there is no variation option, they will be available in the colours as shown in the pictures above.

Your package will include the following

• Brand new & well packaged item
• Sidi Crossfire Motocross Boots in your colour & size

These Sidi Crossfire Off Road Motocross Boots are available in various sizes, please use the guide below to help determine your correct size preference.