Rev It Spitfire One Piece Motorcycle Suit

The Rev'It! Spitfire One Piece Motorbike Leather Suit is packed with features...

PROTECTION FEATURES

Outer Shell

• Monaco Performance Cowhide - This top-grain leather not only has had its surfaces sanded to correct imperfections, it has been reinforced to up its performance factor for riding on the track or street. Long-lasting and extremely protective
• PWR|Kevlar Stretch - This PWR|shell stretch material has aramide and nylon fibres for extra strength
• Neoprene - Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant
• Lorica® - Lorica® is constructed from microfibres that give the material characteristics similar to those of natural leather, including a leather look. This low-maintenance material is not as strong as leather, but softer and lighter, with a consistent thickness that makes it easier to process

Protection

• Dual-Comp Protectors at Shoulders, Elbows and Knees - TPU aluminium protector at shoulders, elbows and knees. The dual-comp protector consists of a 3D, pre-shaped honeycomb structure of TPU material, topped by an aluminium high-impact shield, for ultimate sliding. This lightweight hard part increases the level of protection significantly, without adding the considerable weight of traditional plastic hard parts. When fighting G-forces, every gram counts! Under the shoulder and elbow parts is ergonomically shaped, CE-approved armour, perfectly placed to maximize impact-resistance while preserving freedom of movement

• Dual-Comp Knee Slider Type A - Dual-comp knee sliders type A are constructed from a high-performance TPU compound, combined with an extra durable PA6 compound. Specially designed for racers who want high-performance sliders, these higher-quality compounds offer good feedback, giving you maximum durability without compromising your feel on the road. The sliders come in a pair of two, each anatomically shaped to fit either the left or the right knee, and high-quality Velcro attaches the sliders to leathers, ensuring they stay where they need to. Type A sliders are available in three colours, to fit every colour combination of your leathers, and the dual-injected colours keep the design visible even when the sliders begin to wear
• Betac® CE Protection - The Betac® protection in REV'IT!'s suits is the same as their heroes use in professional racing series such as MotoGP. They are CE rated for the highest level of protection. The use of Velcro makes sure they are fixed to the outer shell, preventing them from moving or turning in case of an impact
• Adjustable Betac® Protection at Shoulders and Knees - This MotoGP spec protector is adjustable on the shoulders and knees, making it possible to customize the fit of the protector to the position on the bike. Thanks to the strong Velcro it will stay in place once positioned

• SEESMART CE-Level 1 Type B Hip Protector Insert - Version RV30

• Safety Stitching - Stitching seams can be the weakest link in motorcycle garments, as they can rip upon impact. This ripping of seams can be prevented, however, through safety-stitching technology. REV'IT! uses safety stitching on garment areas at increased risk of impact (directive on the definition of risk category in zones 13595-1:2002)
• Safety Seams - The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV'IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn
• Double Leather Seat - The seat of your garment is a critical impact zone. To prevent the stitches from tearing, we reinforce the leather seat, giving you two layers of protection
• Prepared for SEESOFT CE-Level 2 Back Protector Insert - Type RV - The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety

Composition

• Outer Shell - 93% Leather, 7% Polyamide

ERGONOMIC FEATURES

Fit

• Race Fit, Tight - The Rev'It! Spitfire One Piece Suit is designed to be a slim fit!

Ventilation

• Partly Perforated Outer Shell
• VCS|Speed Hump - The REV'IT! ventilated speed hump has an air inlet at the top of the hump. The perforated foam inside this leather speed hump is designed to let air flow through the garment, spreading over the riders back for comfortable ventilation. Extra cooling of the area is especially beneficial now that riders are wearing back protectors more and more

Features

• Calf Zippers
• Comfort Cuffs
• Stretch Lips
• Stretch Panels - The stretch panels in this garment aid in flexibility. They contribute to the riders comfort as they provide great freedom of movement
• Removable Lining - A removable, washable mesh lining with stretch inserts for more comfort
• Aero Cool 3D Mesh - This open-loft three-dimensional mesh helps facilitate optimal ventilation while riding. It features integrated lines to wick moisture away from the body, keeping riders cool and comfortable under even extreme circumstances

Pockets

• Inner Pocket

Your package will include the following:

• Rev It Spitfire One Piece Motorcycle Suit

Rev'It! Mens' Jacket Sizing Guide

Please use the conversion table below to determine the right size for you:

Please Note: this product is sized by the UK chest size in inches. See the table for other size conversions. The Rev It Spitfire One Piece Suit is designed to be a slim fit.