The Rev It Orlando H2O Dark Blue Motorcycle Jeans are
part of the latest REV'IT! collection.
The construction of the Orlando H2O jeans is similar to the Memphis H2O,
but incorporates polycotton stretch denim 3L that is slightly higher in
elasticity. Strategically placed PWR | shield adds abrasion resistance
to critical impact zones, while the mesh liner wicks moisture away. The
Orlando is equipped with CE-rated SEESMART Knee Protectors, upgradable
with CE-rated TRYONIC hip protectors. The five pocket, regular cut jeans
are pure motorcycle jeans disguised as everyday fashionable jeans.
Key Features / Points:
-
Waterproof Membrane
-
All-Weather Protection
-
SEESMART CE Knee Armour
-
Polycotton Twill Lining
-
Comfort Seat
View all Rev
It Motorcycle Jeans. View all Motorcycle
Jeans.
The Rev It Orlando H2O Dark Blue Motorbike Waterproof Denim Pants
are packed with features...
PROTECTION FEATURES
Outer Shell
-
Polycotton Stretch Denim 3L - The polycotton denim 3L consists
of three functional layers, which are laminated together to become a
single strong layer of all-weather protection. A waterproof Hydratex®
membrane is laminated to the strong and abrasion resistant denim outer
shell. To enhance wearer comfort a protective inner mesh lining is
laminated to the membrane itself. Water-resistant, cut- and
abrasion-resistant and highly comfortable-all benefits of this unique
3-layer system
Lining
-
Polycotton Twill - Polycotton is a mixture of polyester and
cotton. The polycotton is woven into a twill pattern in order to
improve the strength and durability. Twill is a type of weave with a
diagonal parallel pattern providing the fabric a very stylish look and
feel
-
Mesh
Protective Layer
-
PWR | Shield - PWR | shield has been developed in-house by the
REV'IT! R&D department. This revolutionary material blends
polyethylene/polyamide and aramid fibers into a unique knitted
construction, resulting an extremely strong, exceptional cut, tear and
abrasion resistant fabric. The PWR | shield lining resides in the
knee, hip and backside impact areas as described in the European CE
13595 norm. Combined with a Cordura® denim outer shell, the PWR |
shield lining meets the CE-level 1 standard for abrasion resistance
Waterproofing
-
Hydratex® 3L Pro - A 3-layer fabric. The innovative
REV'IT! Hydratex® | 3L Pro membrane consists of three functional
layers, which are laminated together to become a single strong layer
of all-weather protection. A waterproof membrane is laminated directly
onto the inside of the abrasion-resistant outer shell, and a
protective inner lining laminated onto the membrane itself prevents
run-and-tear damage. Water repellence, light weight, and high
breathability are all benefits of the 3-layer system
Breathability
Protection
-
SEESMART CE-Level 1 Protection at Knee - SEESMART protectors
offer the highest level of flexibility while still passing the
EN1621-1:2012 CE-Level 1 impact tests, in both normal and hot (T+)
conditions
-
Prepared for TRYONIC SEESOFT CE-Level 1 Type B Hip Protector Insert
- Version RV01 - The hip protector pockets in this REV'IT! garment
are tailor-made to accommodate the TRYONIC SEESOFT CE-level 1type B
hip protectors version RV01. An easy upgrade to maximize safety
-
Double Layered with PWR | Shield Knit Protection - PWR | shield
is created with a unique knit technique which results in a fabric with
unsurpassed cut, tear and abrasion resistance level. This product is
equipped with PWR| shield at the palm for extra safety in case the
palm of the hand comes in contact with the asphalt
-
Safety Stitching - Stitching seams can be the weakest link in
motorcycle garments, as they can rip upon impact. This ripping of
seams can be prevented, however, through safety-stitching technology.
REV'IT! uses safety stitching on garment areas at increased risk of
impact (directive on the definition of risk category in zones
13595-1:2002)
ERGONOMIC FEATURES
Fit
Features
-
Water-Resistant Zipper - A rubber seal added to this zipper
makes it water repellent, preventing water from entering the pocket
behind it
-
Comfort Seat - We've relocated the crotch seams of a
traditionally constructed jeans pattern to allow for greater freedom
of movement and comfort while sitting on the bike-especially for
extended periods of time. This small but critical design is invisible
whether on or off the bike and helps eliminate painful pressure points
plus it ensures the waistband of the trousers stays in place when
seated
-
Triple Needle Stitching - The seams have been triple stitched.
This means there are three separate seams stitched parallel to each
other to provide extra strength and durability
-
Extra Comfort by Mechanical Stretch - Stretch is always
comfortable to wear but mechanical stretch takes it to a higher level.
Normally it is the fabric itself that is stretchable; in this case it
is the weaving that makes the fabric stretchable
-
Zipper Fly Front Closure
Pockets
Your package will include the following:
-
Rev It Orlando H2O Dark Blue Motorcycle Jeans
Rev'It! Mens' Jeans Sizing Guide
Please use the conversion table below to determine the right size for you:
UK/US Label Size |
28 |
30 |
31 |
32 |
33 |
34 |
36 |
38 |
EU Size |
44 |
46 |
46/48 |
48/50 |
50 |
52 |
54 |
56 |
Length: Short = 32"; Standard = 34"; Long = 36"
Please Note: this product is sized by the UK waist label size. See the table for other size conversions.