Moveo Carbon Motocross Neck Brace

The Moveo Safety Carbon Motocross Neck Guards are packed with features..

Specifications include

Weight:

• 723g

Materials:

• Rear frame (AMC Composite): Carbon and Aramid multilayer Composite
• Frontal frames: carbon fiber reinforced polyamide
• Surface foam: ERF crosslinked composite
• Hinges (FHD Technology): elastomeric PP
• Quick coupling system: Utramate by Velcro
• Mechanisms and moving systems: POM

Sizes:

• Range of use: Chest contour from 80 up to 125 cm
• Integrated size regulation system. Changing parts is not needed
• 4 sizes

SAFETY

MOVEO Neck BRACE helps to reduce neck injuries, both by excessive rotation as per load transfer, that is why it is the definitive answer to the expectations and needs of bikers and motorcycle users.

This asseveration is made after years of research in accidentology and biomechanical studies, to understand in depth what neck injuries are, and how are they produced.

And to prove all the above, MOVEO Neck BRACE has fulfilled the most demanding experimental testing never carried-out before on this kind of products:

• Direct impact on helmet
• Direct impact on thorax
• Multiaxial impacts:
  • Impact testing of a motorcycle driver against barrier (UNE 135900)
  • Motorcycle-against-car impact testing (ISO 13232)
• Biomechanical Criteria Moveo Neck Brace limits the rotation of the head and the forces supported by the neck, aspects studied using biomechanical criteria based on forces (Fx y Fz), flexion-extension Moments (Mcoy), or specific criteria for the neck (Normalized Neck Injury Criterion (Nij) o Neck Criterion Rear Impact (Nkm), among others.
• The best motorcycle protection levels with MOVEO BRACE Moveo Neck Brace achieves a reduction of 30% in Hiperextension values when testing a direct impact on helmet, and an overall reduction of about 20% in injurie values when testing against protection barriers.
• Highly instrumented testing Complex testing methods based in anthropomorphic dummies (Hybrid III and BioRID II) and advanced instrumentation have made possible to record, study, evaluate and optimize the performance of the system.
• Control of excessive load transfer Moveo Neck Brace is focused in the reduction of cervical injuries by controlling excessive load transfer, then limiting forces over backbone.
• Neck injuries The Moveo Neck Brace works reducing the injuries originated by compression, hiperflexion, hiperextension, whiplash, excessive rotation, or by shear forces on top of the neck.
• Virtual simulation. The other reality Thanks to the most advanced simulation methodologies of Finite Elements, different design alternatives have been evaluated, as well as impact situations and materials. Delivering a neck brace of top quality and strength.

COMFORT

MOVEO Neck BRACE is born with the aim of protect users both in their daily commuting, as in their racing, motocross, or adventure activities.

To get this motorcycle protection effective, it has to be given by a simple, light device, able to be fitted without noticing the user, and without restriction of any common movement, both standing as driving.

The special design of the hinge, based in the FHDtechnology (Flexible Hinge Design) allows the movement of the front parts over the rear part of the neck brace in a natural way, adapting the manners of every user.

His minimum weight and his balance over the body of the user, allows to travel long distances without feeling tired.

• Flexibility of Movement The FHD technology will allow every natural movement (raising arms, turn your head, open your jacket, remove your Moveo Neck Brace together with your jacket, access to the internal pockets in a simple way, etc), without needing to remove your helmet or gloves.
• Low weight equals comfort The utilization of the most appropriated technical materials has helped to achieve a final weight lower than market average; 723g for the Carbon version, and 795g for the Dynamic version.
• Proven durability of the FHD technology The elements of the hinge have been tested to fulfill the needs and requirements of every user, beating by far 20.000 cycles in the fatigue tests carried out.
• Comfort based in ergonomic studies This neck brace has been developed taking into account human phisiognomy and his movements. This design has been accompanied with the selection of the most appropriate materials to obtain the freedom of movement shown in the final product

DESIGN

MOVEO Neck BRACE is a neck brace simple in his form, therefore light, manageable and allows freedom of movement.

His small design, mainly in the frontal area, permits an easy monitoring of the board panel and other elements near you, as well as to turn your head in freedom in roundabouts and crossings.

Thanks to the design solutions implemented, this neck brace shows a high versatility and adaptability, been able to fit different sizes of the user and be compatible with other motorcycle protection.

On top, especial care has been put into detail, with the possibility to "custom" the neck protector with different colors.

• Compatible with back protection Moveo Neck Brace is designed to be compatible with the vast majority of back protection products. To do so, an easy dismounting of the lower foam part lets you adjust your Moveo Neck Brace to your usual clothing.
• Several sizes in a single product Moveo Neck Brace fits different sizes, easily and without additional elements. Simply putting the adjustment screw into the desired size position.
• The best materials In Moveo Neck Brace the most advanced materials have been employed, in order to achieve the best performances on comfort and stiffness. With the spotlight on the carbon Composites of the Carbon version, the elastomeric materials employed in the FHD technology, the ERF foams and the plastics reinforced with fiberglass and carbon employed in the rest of structural parts.
• Biomechanicly thought For the functional design of the Moveo Neck Brace, the internal movement of the bones and muscles of the human body have been taken into account, which allows raising arms and shoulders without changing the relative position of the Moveo Neck Brace with the helmet. More than this, it does not transmit effort directly to the clavicle, reducing the possibility of fracture in the case of an accident.

INTEGRATION

MOVEO Neck BRACE is the only neck brace din the market giving the possibility to get coupled with any jacket in a simple way. Coupling with the jacket by means of velcro and/or straps provides high comfort to the user, and mobility in a daily use.

The special design of the ancillary harness TF-Strap (Tehcnical Fabric Strap) and the frontal section of the neck brace, lets you access to the interior of the jacket simply disconnecting the frontal locking and opening the zip of your jacket.

MOVEO Neck BRACE moves with you and your clothing.

• Several options for coupling Moveo Neck Brace is developed to be compatible with several ways of coupling with your jacket. You can choose yourself whatever you like the most and better fits to you. Every solution will give a different integration level.
• TF-Strap (Tecnical Fabric-Strap) More than this, Moveo Neck Brace has a set of ancillary harness made in technical fabric that allows your daily commuting or an off-road trip (motocross, adventure tours, mountain-bike) without needing the coupling with your clothes (included in the pack).
• Coupling with VELCRO brand fasteners This kind of quick coupling permits a temporary connection of the Moveo neck Brace with the clothes. The KIT of VELCRO brand fasteners has a "hook" part that you must glue to the protector in the foreseen cavities, and a "loop" part that you must stitch to the jacket, facing similar patterns.

The Moveo Carbon Neck Braces are currently available in the colours shown in the product variation above, if there is no variation option, it will be available in the colours as shown in the pictures above.

Your package will include the following

• Moveo Neck Brace Carbon
• Instruction manual
• Bag to preserve the Moveo Neck Brace
• TF - Straps
• KIT of Velcro to couple MOVEO Neck Brace Carbon with a jacket
• Allen tool to adjust different sizes.
• Zip extender of 50mm