The Rev It Akira Leather Motorcycle Jacket is part of
the latest REV'IT! collection.
The Akira jacket sports MotoGP styling in the form of a jacket rather
than a full suit. Dual-comp protectors and CE-level 2 rated SEEFLEX
protectors come standard at shoulders and elbows, with the option to
upgrade with a CE-level 2 rated SEESOFT back protector insert. Thanks to
the detachable thermal body warmer the jacket is also useable when
temperatures are below ideal. A semi-perforated exterior shell enables
air to reach the body once the liner is detached. With slit pockets,
document pockets, and inner pockets the Akira jacket lets a rider keep
valuables close. The combination of Augustini and Monaco cowhide leather
and PWR|shell 500D stretch is blended together using sturdy safety
stitching and safety seams. The long and short connection zippers allow
the Akira jacket to be combined with virtually any trousers from the
REV'IT! collection.
Key Features / Points:
-
Augustini & Monaco Cowhide Leather Construction
-
SEEFLEX CE-Level 2 Protection at Shoulders & Elbows
-
TPU Aluminium External Protectors at Shoulders & Elbows
-
Detachable Thermal Bodywarmer
-
Partly Perforated Outer Shell for Ventilation
View all Rev
It Motorcycle Jackets. View all Leather
Motorcycle Jackets.
The Rev It Akira Leather Motorbike Jacket is packed
with features...
PROTECTION FEATURES
Outer Shell
-
Augustini Full Grain Cowhide - This high-quality, full grain
cowhide is extremely durable and breathable, providing a combination
of comfort and protection on any length of ride
-
Monaco Performance Cowhide - This top-grain leather not only
has had its surfaces sanded to correct imperfections, it has been
reinforced to up its performance factor for riding on the track or
street. Long-lasting and extremely protective
-
PWR|Shell 500D Stretch - This material is REV'IT!'s take on
Cordura®. Consisting of 100 percent high-performance polyamide yarns,
PWR|shell takes the best properties of Cordura® - a high melting
point, tremendous tear- and abrasion-resistance, excellent durability
- and puts the unique REV'IT! design stamp on it. This PWR|shell
fabric comes in a stretch variant. 500D indicates the density of the
fabric. The higher the number the better the abrasion- and tear
resistance properties are
-
Neoprene - Neoprene is a synthetic rubber useful for protective
gear. It is abrasion-resistant, chemical-resistant, waterproof,
somewhat stretchable, and buoyant
-
Lorica® - Lorica® is constructed from microfibres that
give the material characteristics similar to those of natural leather,
including a leather look. This low-maintenance material is not as
strong as leather, but softer and lighter, with a consistent thickness
that makes it easier to process
Insulation
-
Detachable Thermal Bodywarmer
Protection
-
Dual-Comp Protectors - TPU aluminium protectors at shoulders
and elbows. The dual-comp protector consists of a 3D, pre-shaped
honeycomb structure of TPU material, topped by an aluminium
high-impact shield, for ultimate sliding. This lightweight hard part
increases the level of protection significantly, without adding the
considerable weight of traditional plastic hard parts. When fighting
G-forces, every gram counts! Under the shoulder and elbow parts is
ergonomically shaped, CE-approved armour, perfectly placed to maximize
impact-resistance while preserving freedom of movement
-
SEEFLEX Level 2 CE Protection - Certified CE-Level 2 according
to the new norm EN1621-1:2012 the SEEFLEX protector is the latest
innovation from REV'IT!'s in-house R&D department. The new norm also
tests the impact levels in various temperature ranges. The SEEFLEX
protectors easily surpass the new norm without sacrificing wearer
comfort
-
Prepared for SEESOFT CE-Level 2 Back Protector Insert - Type RV
- The back protector pocket in this REV'IT! garment is tailor-made to
accommodate the SEESOFT CE-level 2 back protector insert Type RV - an
easy upgrade to maximize safety
-
Safety Stitching - Stitching seams can be the weakest link in
motorcycle garments, as they can rip upon impact. This ripping of
seams can be prevented, however, through safety-stitching technology.
REV'IT! uses safety stitching on garment areas at increased risk of
impact (directive on the definition of risk category in zones
13595-1:2002)
-
Safety Seams - The stitching in motorcycle garments contributes
greatly to the abrasion resistance of the total gear. This is why
REV'IT! uses safety seams on garment areas at increased risk of
impact. Safety seams have a visible as well as an invisible seam. This
construction keeps the material of the outer shell together, even when
the visible seam is thorn
Composition
-
Outer Shell - 88% leather, 11% polyamide, 1% elastane
-
Lining - 98% polyester, 1% polyamide, 1% elastane
-
Thermal Liner - 100% polyamide (insulation 100% polyester)
ERGONOMIC FEATURES
Fit
Adjustability
-
Adjustment Straps at Waist
Ventilation
-
Partly Perforated Outer Shell at Front, Back and Arms
Features
-
Comfort Cuffs
-
Stretch Lips at Back, Upper Arms, Elbows and Shoulders
-
Stretch Panels at Arms and Chest - The stretch panels in this
garment aid in flexibility. They contribute to the rider's comfort as
they provide great freedom of movement
-
Short and Long Connection Zippers - Thanks to the short and
long connection zipper, this jacket is compatible for pairing with any
pair of trousers in the REV'IT! line
Pockets
-
Slit Pockets
-
Document Pocket
-
Inner Pockets
Your package will include the following:
-
Rev It Akira Leather Motorcycle Jacket
Rev'It! Mens' Jacket Sizing Guide
Please use the conversion table below to determine the right size for you:
Letter Size |
XS |
S |
M |
L |
XL |
XXL |
XXXL (XYL) |
XXXXL (XZL) |
5XL |
6XL |
UK / US Chest |
36" |
38" |
40" |
42" |
44" |
46" |
48" |
50" |
52" |
54" |
EU?Size |
46 |
48 |
50 |
52 |
54 |
56 |
58 |
60 |
62 |
64 |